FLOATING FLOOR UNDERFLOOR HEATING SYSTEMS

Are you looking for a floating floor underfloor heating system, please see some of the fitting options we have below. We have supplied and fitted thousands of these types of underfloor heating systems over the last 15 years.

You can trust us to provide you with the best solutions for your water based underfloor heating project.

We have 4 different floating floor underfloor heating systems to choose from...

Tile-Fix XPS boards used for floating floor underfloor heating systems

TileFix-18 Insulation Panels

The perfect solution for your tiled floors. Low build 18mm 500kPa XPS insulation panel, reinforced with a glass fibre fleece. Designed for tiling directly over the top.

pre-grooved insulation panels with a warm water underfloor heating pipe and engineered wood fitted over the top.

Pre-Grooved Insulation Panels

At just 25mm thick these pre-grooved insulation panels are an ideal solution, they come with everything needed to lay underfloor heating as a floating floor system.

aluminium spreader plates being screwed over a timber joist floor.

Aluminium Plates & Battens

A dry underfloor heating fitting method that is tried and tested on 1000's of heating systems. This system will add minimum additional weight and height to your floor.

pre-grooved insulation panels with a warm water underfloor heating pipe and engineered wood fitted over the top.

Battened Floor Drymix System

This traditional floor heating solution is very popular. Using readily available materials you can opt for this method as a low-cost solution to installing an UFH system.

WE SUPPLY SIMPLE TO USE FLOATING FLOOR UNDERFLOOR HEATING ROOM THERMOSTATS

We use Heatmiser for all our underfloor heating controls. Including simple dial room thermostats, programmable and wireless thermostats, wifi thermostats and touch screen stats. We even have thermostats you can control using your smart phone from anywhere in the world. 

Floating Floor Underfloor Heating - TileFix-18 Insulation Panels

The perfect solution for tiled floors. Low build 18mm 500kPa XPS insulation panel, reinforced with a glass fibre fleece. The system is designed for tiling directly over the top using a suitable flexible floor tile adhesive.

This System Features:

  • This is an 18mm ultra thin floor heating system.
  • Tile directly over the top of these boards, GRP bonding mesh, no primer needed, just flexible floor tile adhesive.
  • High compression strength – 500kPa XPS.
  • Ideal for use in renovation projects or for new builds.
  • Suitable for most applications where the heat loss does not exceed 75W/m².
Tile-Fix XPS boards used for floating floor underfloor heating systems

Floating Floor Underfloor Heating - Pre-Groove Insulation Panels

At just 25mm thick the pre-grooved insulation panels are an ideal solution, they come with everything needed to lay underfloor heating as a floating floor system. This solution meets the requirements of robust detail.

This System Features:

  • These are fast, easy to fit, and a completely dry installation system.
  • These foil faced insulation panels provide an even heat distribution across your full floor area.
  • We provide the standard panels with 200mm pipe spacing for normal heat sources, or 150mm pipe spacing which is used for low temperature heat sources.
  • Meets the requirements of robust detail.
  • Suitable for most applications where your heat loss doesn’t exceed 75W/m².
pre-grooved insulation panels with a warm water underfloor heating pipe and engineered wood fitted over the top.

Floating Floor Underfloor Heating - Aluminium Plates & Battens

A quick, easy, dry underfloor heating installation method that is tried and tested with 1000’s of heating systems. This installation method will add very minimal additional weight and minimal increase in your floor build height.

This System Features:

  • These are easy to install in new and existing buildings.
  • These Aluminium plates will spread the heat evenly across the full floor area.
  • Fast heat up response times.
  • Different pipe centres to suit low flow temperatures.
  • Suitable for most applications where the heat loss does not exceed 75W/m².
aluminium spreader plates being screwed over a timber joist floor.

Floating Floor Underfloor Heating - Battened Floor Drymix System

This traditional underfloor heating solution is still very popular today. Using readily available construction materials you can opt for this installation method which is a low-cost solution to installing an UFH system.

This System Features:

  • Easy to install in new or existing buildings.
  • Low cost, so no specialist fixing system is required.
  • Height increase can be as little as 50mm
  • No wet screed, so no drying time
  • Choose different pipe centres to suit low flow temperatures
  • A traditional way to install UFH using low cost, readily available building materials.
pre-grooved insulation panels with a warm water underfloor heating pipe and engineered wood fitted over the top.